Verifying Reverse-Voltage Sharing Across Series Rectifiers
Two rectifiers in series carry the same current, but they can block different voltages. Their leakage characteristics and temperatures determine the steady off-state distribution. During commutation, differences in stored charge, junction capacitance and wiring can produce a second form of imbalance. Verify the voltage across each device over both intervals.
For static balancing, a resistor across each diode can make the voltage distribution less sensitive to leakage variation. Use leakage limits at the relevant voltage and temperature and include resistor tolerance. Check the resistor's working-voltage rating and power dissipation. For illustration, a resistor carrying 1 mA at 400 V dissipates 0.4 W. The design must also account for transient voltage and the physical spacing of the components.
Dynamic sharing needs its own assessment. A diode that finishes recovery first can take a large portion of the blocking voltage while the other device still carries recovery current. RC networks may help control that distribution, with their capacitance, discharge current and loss checked against the commutation waveform. Use matched, suitably rated differential probes to compare individual voltages without introducing excessive capacitive imbalance.
Compare reverse leakage and recovery data when screening the MOT power diode range. For a SiC diode alternative, include capacitive charge and temperature behavior in the test plan. Validate the complete string at high voltage, hot and cold conditions, startup and shutdown, with margin for device and balancing-component variation.